Klipsch Heritage Forte IV Matched pair of floor-standing speakers (Natural Cherry)

Features

Heritage Series (Made in the USA): The Forte IV is part of the Klipsch Heritage Series that is built and handmade in the USA at Klipsch's manufacturing facility in Hope Arkansas. They are meticulously handcrafted and assembled using the finest quality materials, even down to the highest-grade adhesives and fasteners (no detail goes unnoticed). Each Heritage Series loudspeaker utilizes Klipsch proprietary horn-loaded technology to bring a live music listening experience into the home. All Heritage Series loudspeakers are available in a variety high-quality wood veneers. The Klipsch Heritage series carries on Paul W. Klipsch's four principles of great sound -

• High Efficiency & Low Distortion: Klipsch horn technology is highly efficient, providing more accurate sound with less power and less distortion - resulting in louder, cleaner audio. Klipsch's Law: Efficiency is inversely proportional to distortion.
• Controlled Directivity: Klipsch horn technology accurately directs sound to the proper locations, which, in turn, creates a more lifelike soundstage without wasting acoustic energy where sound is not needed or desired.
• Wide Dynamic Range: The softest sounds are reproduced with remarkable clarity and the loudest sounds are delivered without harshness or distortion - with the greatest possible range between the softest and loudest sounds.
• Flat Frequency Response: Audio is delivered without frequency bias - no unnatural highs, mids or lows - reproducing recorded sound as accurately as possible without colorization.

The Forte IV: First introduced in 1985, the Forte quickly established itself as the most popular Klipsch model. The elegant design and outstanding performance made the Forte a standout among its competitors. In 2017, Klipsch re-introduced the Forte as part of the Heritage speaker series. The new Forte IV features updated cosmetics and the latest advancements in acoustic engineering, while maintaining the original charisma that made the Forte so popular.

• 3-Way Design: The Forte IV hosts a three-way design utilizing a 12" woofer and horn-loaded midrange and tweeter. The Forte IV incorporates an all new K-702 midrange compression driver, featuring a polyimide diaphragm for exceptional detail and dynamics. The K-702 midrange is mated to a modified Tractrix horn - featuring Klipsch's patented Mumps technology for even polar response of mid frequencies, giving you more consistent sound throughout the listening area. The titanium diaphragm high-frequency driver has an all-new wide dispersion phase plug for providing exceptionally even high-frequency dispersion for a wider, more accurate sweet spot.
• High-Fidelity Crossover Network: The Forte IV has been completely revoiced from its predecessor, utilizing premium componentry in an all new high-fidelity crossover network (minimizing electrical degradation throughout the circuitry) for truer to life sound with best in class efficiency and power handling. The new network draws from the classic three-way steep slope design of the legendary Klipschorn and La Scala speakers.
• 15" Passive Radiator: The Forte IV's well-extended bass is found in the use of a rear-mounted passive radiator. A mammoth 15" in size, this sub-bass radiator operates on acoustic pressure generated by the woofer for greater bass output and extension that results in real full-range performance.

Book-Matched Wood Veneers: Klipsch only uses book-matched wood veneers for the Heritage series. Each pair of Forte IV loudspeakers is grain-matched using wood veneer panels that come from the same timber. The veneer leaves are kept in order as they are delicately sliced from the timber and precisely arranged to provide a mirror image at the splice joint - like turning the pages of a book. This gives each speaker a more aesthetically appealing and consistent appearance that is treasured more than any other cut of wood veneer. Each cabinet is carefully matched so that each speaker in the pair is practically indistinguishable from the other. The speakers move seamlessly together through the factory. Each finished product is inspected and labeled with sequential serial numbers, ensuring that each pair of speakers leave the factory as a meticulously crafted set.

Dual Binding Posts: The Klipsch Forte IV is outfitted with two sets of sturdy binding posts allowing to bi-amp or bi-wire the floorstanding loudspeaker. These binding posts ensure a secure connection to many types of cable and connectors. The binding post terminals will accept banana plugs (single only), pin-connectors, spade-lugs and bare wire (up to 10AWG). Two plastic caps will need to be removed to use banana plugs.

• Bi-Wiring: Bi-wiring can provide noticeable improvements in the overall transparency of your loudspeakers. Run separate speaker wires to the low & high frequency drivers from a single amplifier (the upper set of binding posts are for the high frequency drivers; the lower set of binding posts are for the low frequency drivers).
• Bi-Amping: Bi-amping allows you to use separate amplifiers for the high & low frequency sections of your loudspeaker for greater dynamic range & lower distortion. We recommend that your separate amplifiers have identical gain to preserve the speaker's voicing balance.

Placement Options: Your Klipsch Forte loudspeakers will perform well in a variety of locations but best results will be achieved using the following general guidelines. Experiment with the below guidelines to suit your taste and to compensate for your room’s acoustic characteristics.

• Place on a common wall 6' to 15' apart and position them equidistant from the wall behind the speakers. Angle the speakers toward the listener and even with or forward of any adjacent obstructions.
• Placing them near a corner or wall provides the greatest amount of bass while moving the speakers away from room boundaries reduces bass energy.
• The Forte IV features a rear-firing 15” passive radiator that requires the loudspeaker to be placed at least 1" away from the back wall. For optimal low-bass performance, it is recommended the loudspeaker be placed within 2" to 10" off the back wall.
• Asymmetrical placement of a pair of speakers from adjacent side walls can smooth room-induced bass unevenness.

Note: Self-stick rubber pads are supplied for attachment to the bottom of the speaker's riser for use on hard-surface floors.

Klipsch Heritage Product Warranty

As a Klipsch Heritage model, this speaker is covered by Klipsch’s extended Heritage warranty — longer than Klipsch’s standard passive speaker coverage.

• Limited 10-year warranty on parts and labour

This extended coverage applies to the Klipschorn AK6, La Scala AL5, Cornwall IV, Forte III & IV, Heresy IV, and Jubilee. See Klipsch’s official warranty policy for full terms and exclusions.

Shipping Policy at CapitalSound.ca

Free Shipping Across Canada

At CapitalSound.ca, we are pleased to offer Free Standard Shipping on all orders of $99 or more within Canada. Experience the top-notch quality of our products without the additional cost of shipping.

Orders under $99 will have shipping calculated separately and confirmed with you after checkout.

Estimated Delivery Time

• Orders are typically processed within 1–2 business days.
• Standard shipping generally takes 3–7 business days.
• From time to time, an item may be temporarily out of stock and need to be ordered in from our distributor, which can add a few extra business days before your order ships. If this applies to your order, we’ll let you know as soon as possible.

What to Expect

1. Order Confirmation: You will receive an order confirmation email as soon as you have placed an order. Please keep this email for your records.
2. Shipment Notification: We will send you a shipment notification email when your order has been shipped.
3. Shipping Cost (orders under $99): If your order doesn’t qualify for free shipping, we’ll follow up with the shipping cost for your order before it ships.

Freight & Oversized Items

Some large or heavy products — including floor-standing speakers, large subwoofers, and TVs — ship via freight carrier rather than standard parcel courier. For these items:

• Delivery times may be longer than standard shipping; we’ll confirm an estimate with you before your order ships.
• Someone must be present to receive the delivery.
• Delivery is typically curbside/doorstep only — unpacking, setup, and installation are not included unless purchased separately or arranged through our showroom.

If freight charges for an oversized item are not already included in your order total, we will confirm the cost with you before shipping.

Additional Information

• Signature may be required upon delivery.
• We currently do not ship to P.O. Boxes.

Shipping Damage Policy

If the shipping box shows signs of physical damage, we recommend inspecting the product while the shipping company is present. Minor punctures or dents to the box do not often result in damage to the well-padded product inside, so a refusal of delivery is generally not necessary for minor box imperfections. However, should the product itself show signs of damage, it must be refused at the time of delivery for an RMA. Products not refused due to damage at the time of delivery will not be eligible for RMAs. To ensure your full rights to warranty and potential future claims, please have the delivery company note any box damage on file, even if the product itself appears undamaged.

Questions?

For any questions regarding your order, please contact us.