Treat yourself to top-notch sound with a speaker that blends seamlessly into your home's decor. The Klipsch® CDT-3800-C-II installs in your ceiling, so it won't take up one inch of floor space. And its high-tech design and solid construction make it a great choice for movie and music lovers alike. You can use multiple '3800-C-IIs for surround sound in an all-Klipsch home theater, or install them in pairs for stereo listening with your multi-room audio system. Either way, you'll experience accurate Klipsch sound without the clutter of conventional speakers.
The '3800-C-II's 1" aluminum tweeter tweeter gives you 100-degree dispersion, and it swivels, so you can aim the sound precisely where you need it to go. You can even rotate the Cerametallic™ woofer a full 360 degrees and tilt it up to 15 degrees in any direction. This flexibility gives you full, detailed sound no matter where you place the speaker. Plus, a tweeter attenuation switch lets you tailor the sound to suit your personal taste and room's acoustics.
Because high-frequency sounds are more directional than bass frequencies, it's especially important to target them right toward your ears. Klipsch places their tweeter inside a flared opening, known as a "horn," which disperses the highs evenly across your listening area. This design brings out details in everything you listen to, while reducing reflections that can color the sound. The horn also improves dynamics and efficiency, for powerful, "front row" sound that remains crystal-clear at all volume levels.
The '3800-C-II stays inconspicuous with its SlimTrim™ grille. The visible frame size is reduced by 90% and grille depth is reduced by 80% over previous designs, for a nearly flush finish that blends in beautifully. The paintable aluminum, magnetic grille attaches securely with ease to virtually eliminate resonant distortion.
An optional in-ceiling bracket is recommended for installing the CDT-3800-C-II in new construction.
Most speakers don't include any. Learn more about in-wall wiring. Shop our selection of in-wall speaker wire.
Klipsch CDT-3800-C II owner's manual
Controlled Dispersion Technology (CDT): The Klipsch CDT-3800-C II in-ceiling speaker features a patent-pending gimbal mechanism, known as Controlled Dispersion Technology (CDT). The tweeter and woofer are independently adjustable, allowing both the high and low frequencies to be directed toward the listening area.
High Efficiency: The high-efficiency design of the Klipsch in-ceiling speakers allows you to get much more output than most in-wall and in-ceiling speakers. Due to the long speaker wire runs that are common in whole-house audio systems, the power coming from the amplifier is significantly reduced by the time it reaches the speakers. The 92dB efficiency of this speaker means it will play much louder at low power than other less-efficient speakers.
Drivers: The Klipsch CDT-3800-C II uses a high-quality 1" aluminum dome compression driver (tweeter) mated to an exclusive Tractrix Horn, combined with a 8" IMG woofer in a 2-way design.
Note: The manufacturer has specified the maximum power handling of this speaker as 50 watts RMS (200 W Peak). Klipsch has also published a recommended amplifier power specification as 100 watts.
Speaker Terminals: The speaker has a pair of spring clips that can accept up to 12-gauge wire or pin connectors.
Tweeter Attenuation Switch: If the speaker is installed in an acoustically bright room, such as a bathroom or a kitchen, you can attenuate the tweeter by -3dB, using the Tweeter Attenuation Switch, located on the front of the speaker.
ABS Basket/Frame: The CDT-3800-C II has a sturdy ABS basket and frame. The frame can be painted to match any decor.
SlimTrim Magnetic Grille: With an all new grille, the visible frame size is reduced by 90% and grille depth is reduced by 80% over the previous design, for a more edge-to-edge consistent look that blends in with the wall more attractively. The new aluminum, paintable, magnetic grille attaches tightly and securely with ease to virtually eliminate resonant distortion.
Installation: The speaker can be installed in new or existing construction. It requires a cutout diameter of 9.8125". For new construction, purchase of the IK-800-C installation kit (714IK800C, sold separately) is highly recommended. For existing construction, the speaker should be installed in drywall at least 3/8" thick. It can also be installed in a drop ceiling (2' x 2' or 2' x 4' ceiling tiles only). In both cases, to maximize the acoustic performance of the in-ceiling speakers, Klipsch recommends you replace the original mounting panel with 1/2" or 3/4" plywood or MDF. A cardboard template is included to assist you in making the cutout.
At CapitalSound.ca, we are pleased to offerFree Standard Shipping on all orders within Canada. No minimum purchase required. Experience the top-notch quality of our products without the additional cost of shipping.
If the shipping box shows signs of physical damage, we recommend inspecting the product while the shipping company is present. Minor punctures or dents to the box do not often result in damage to the well-padded product inside, so a refusal of delivery is generally not necessary for minor box imperfections. However, should the product itself show signs of damage, it must be refused at the time of delivery for an RMA. Products not refused due to damage at the time of delivery will not be eligible for RMAs. To ensure your full rights to warranty and potential future claims, please have the delivery company note any box damage on file, even if the product itself appears undamaged.
For any questions regarding your order, please contact us.