Features
TV Compatibility: The Kanto PT300 tilting low-profile wall-mount bracket supports 32" to 90" flat-panel TVs that weigh up to 150 lbs. The TV must meet the following VESA and screw size requirements.
- VESA Sizes: 100x100 to 600x400
- Screw Size: M4, M5, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Solid Steel Construction: The Kanto PT300 tilting low-profile TV wall-mount bracket is constructed out of solid steel and features a durable powder-coated black finish.
Low Profile Design: The Kanto PT300's low-profile design positions your flat-panel television only 1.4375" away from the wall.
Tilt & Level: The Kanto PT300 lets you easily tilt your TV up to 12° forward to reduce glare and improve line-of-sight with your TV screen. There is also a horizontal leveling feature to facilitate precision leveling once the wall-mount bracket is installed.
Quick Release: Removing your TV from the wall-mount bracket is as easy as pulling on two quick-release cords. Each cord includes a magnetic end, allowing them to be quickly tucked out of sight.
Locking Mechanism: You can use the bracket's locking feature to protect your wall-mounted TV against theft. Two Torx screws can be tightened with the provided key to prevent your TV from being removed. In addition, a lock can be attached to the mounting brackets to secure them in place (lock not included and can be found at most local hardware stores).
Dual-Stud Installation: The Kanto PT300 tilting low-profile TV wall-mount bracket can accommodate both 16" and 24" stud spacing, and comes with all the hardware you need for wood stud and concrete installation. Tools required for installation include -
- Drill
- 7/32" bit (wood), 3/8" bit (masonry)
- Socket wrench
- Phillips screwdriver
- Hammer
- Stud finder
- Level
- Pencil
