Features
TV Compatibility: The Kanto PSC350 full-motion pillar/column bracket supports 37" to 75" flat-panel TVs that weigh up to 88 lbs. The TV must meet the following VESA and screw size requirements.
- VESA Sizes: 200x100mm to 600x400mm
- Screw Size: M5, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Solid Steel Construction: The Kanto PSC350 full-motion pillar/column TV bracket is constructed out of solid steel and features a powder-coated black finish.
Full-Motion Design: The Kanto PSC350 features a full-motion design that accommodates a variety of TV viewing positions. The PSC350 offers extension, tilt, swivel, and roll adjustments.
- Extension: The PSC350 extends 22" from the column or pillar to give you a variety of viewing options. When pushed back into place, your TV sits less than 2.125" from the pillar or column. When pushed back against the wall, the center of the TV plate is centered with the wall mount.
- Tilt:With 12° of forward tilt and 2° of backwards tilt, the PSC350 makes it easy to angle your TV just the way you want it for the perfect viewing angle in your home, office, or business.
- Swivel: The articulating arms on the PSC350 allow you to swivel your TV 90° in either direction when mounted on a pillar or column for a total range of 180° . The overall swivel range will vary depending on the TV's screen size.
- Roll: You can also raise and lower (+/-3° ) the the sides of the TV to make sure the TV is level once it is mounted on the pillar or column.
Pillar/Column Installation: The Kanto PSC350 straps your compatible TV directly to a column or pillar. It works with circular pillars and columns ranging from 10" to 48" in diameter. The PSC350 mount features fabric straps instead of mechanical fasteners for a non-permanent installation that can quickly be removed with no damage. The ratcheting system for the fabric straps is integrated into the wall-plate of the mount, along with silicone padding, to prevent unwanted marking and damage to your pillar or column. The included wall-plate covers hide the ratcheting mechanisms to provide a clean and professional-looking installation.
Wire & Cable Management: An integrated cable management system (consisting of cable channels, a cable sleeve, cable-clips, cable-ties, and hook-and-loop straps) allows you to route your power and audio/video cables neatly between your TV and down the back of the column.
