Features
Outdoor Weatherproof Construction: By passing rigorous outdoor-specific standards defined by UL 2442 PART 2, Kanto's PS400SG outdoor TV mount gives you peace of mind and the ability to secure a TV in any setting or environment. Designed for patios, decks and balconies, the Kanto PS400SG full-motion outdoor wall-mount provides a weather-proof solution for mounting your TV outdoors. The PS400SG offers galvanized and stainless steel construction with a durable powered coated black finish construction that prevents corrosion from the elements.
TV Compatibility: The Kanto PS400SG outdoor full-motion wall-mount bracket supports 30" to 70" flat-panel TVs that weigh up to 88 lbs. The TV must also meet the following VESA and screw size requirements.
- VESA Sizes: 100x100mm to 400x400mm
- Screw Size: M4, M5, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Full-Motion Design: The Kanto PS400SG features a full-motion design that accommodates a variety of TV viewing positions. The PS400SG offers extension, tilt, swivel, and roll adjustments.
- Extension: Even with its low-profile design the PS400SG can extend up to 27.5625" from the wall, giving you plenty of room for tilting and swiveling your TV, or for reaching out from alcoves. Its unique tilt head is designed to nestle into the frame, letting you push your flat-panel TV within 1.9375" of the wall.
- Tilt: The accessible tilt mechanism makes it easy to angle your TV up to 12° forward or 2° backward. Once you've found the best viewing angle, tighten the nuts to secure your TV in place.
- Swivel: The wall-mount bracket's articulating arms allow you to pivot your TV up to 90° in either direction, depending on your TV size, allowing you to achieve the perfect viewing angle.
- Roll: You can also raise and lower (+/-3° ) the the sides of the TV to make sure the TV is level once it is mounted on the wall.
Integrated Cable Management: Two cable management channels are attached to the bottom of the articulating arms These are easily accessed by loosening a screw, twisting them to the side, laying in the cable, and re-inserting the screw.
Single Stud Installation: The Kanto PS400SG outdoor full-motion TV wall bracket mounts to a single wood stud. Mounting hardware is included for wood stud and concrete installations. Tools required for installation include -
- Drill
- 7/32" bit (wood), 3/8" bit (masonry)
- Socket wrench
- Phillips screwdriver
- Hammer
- Stud finder
- Level
- Pencil
- Tape Measure
Security Torx TV Screws: The Kanto PS400SG includes Torx screws to secure the mounting bracket to your outdoor TV for an added layer of protection against unwanted removal.
