Kanto PDX700 Extra-wide full-motion mount for TVs 42"-100"

Features

TV Compatibility: The Kanto PDX700 full-motion wall-mount bracket supports 42" to 100" flat-panel TVs that weigh up to 150 lbs. The TV must also meet the following VESA and screw size requirements.

• VESA Sizes: 200x100mm to 700x500mm
• Screw Size: M5, M6, or M8

Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Solid Steel Construction: The Kanto PDX700 full-motion TV wall-mount bracket is constructed out of solid steel and features a powder-coated finish.

Full-Motion Design: The Kanto PDX700 features a full-motion design that accommodates a variety of TV viewing positions. The PDX700 offers extension, tilt, swivel, and roll adjustments.

• Extension: Even with its low-profile design the PDX700 can extend up to 31.0625" from the wall, giving you plenty of room for tilting and swiveling your TV, or for reaching out from alcoves. Its unique tilt head is designed to nestle into the frame, letting you push your flat-panel TV within 2.4375" of the wall.
• Tilt: The accessible tilt mechanism makes it easy to angle your TV up to 15° forward or 3° backward. Once you've found the best viewing angle, tighten the nuts to secure your TV in place.
• Swivel: The wall-mount bracket's articulating arms allow you to pivot your TV up to 90° in either direction, depending on your TV size, allowing you to achieve the perfect viewing angle.
• Roll: You can also raise and lower (+/-3° ) the the sides of the TV to make sure the TV is level once it is mounted on the wall.

Integrated Cable Management: Four cable management channels are attached to the bottom of the articulating arms. These are easily accessed by loosening a screw, twisting them to the side, laying in the cable, and re-inserting the screw. Route multiple cables down one side, or power and HDMI down opposite sides - whatever works best for your specific application.

Dual-Stud Installation: The Kanto PDX700 full-motion TV wall-mount bracket can accommodate 16" or 24" stud spacing, and comes with all the hardware you need for wood stud and concrete installation. Tools required for installation include -

• Drill
• 1/4" bit (wood), 5/8" bit (masonry)
• Socket wrench
• Phillips screwdriver
• Hammer
• Stud finder
• Level
• Pencil
• Tape Measure

Kanto Product Warranty

Speakers Stands:

• Limited 2 Years

TV and Projector Mounts Stands:

• Limited 5 Years

Shipping Policy at CapitalSound.ca

Free Shipping Across Canada

At CapitalSound.ca, we are pleased to offerFree Standard Shipping on all orders within Canada. No minimum purchase required. Experience the top-notch quality of our products without the additional cost of shipping.

Estimated Delivery Time

• Orders are typically processed within 1-2 business days.
• Standard shipping generally takes 3-7 business days.

What to Expect

1. Order Confirmation: You will receive an order confirmation email as soon as you have placed an order. Please keep this email for your records.
2. Shipment Notification: We will send you a shipment notification email when your order has been shipped.

Additional Information

• Signature may be required upon delivery.
• We currently do not ship to P.O. Boxes.

Shipping Damage Policy

If the shipping box shows signs of physical damage, we recommend inspecting the product while the shipping company is present. Minor punctures or dents to the box do not often result in damage to the well-padded product inside, so a refusal of delivery is generally not necessary for minor box imperfections. However, should the product itself show signs of damage, it must be refused at the time of delivery for an RMA. Products not refused due to damage at the time of delivery will not be eligible for RMAs. To ensure your full rights to warranty and potential future claims, please have the delivery company note any box damage on file, even if the product itself appears undamaged.

Questions?

For any questions regarding your order, please contact us.