Features
TV Compatibility: The Kanto PDC650 full-motion corner wall-mount bracket supports 37" to 70" flat-panel TVs that weigh up to 125 lbs. The TV must also meet the following VESA and screw size requirements.
- VESA Sizes: 100x100mm to 600x400mm
- Screw Size: M5, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Solid Steel Construction: The Kanto PDC650 full-motion corner wall-mount TV bracket is constructed out of solid steel and features a black powder-coated finish.
Corner Installation: The PDC650 TV mount is specifically designed for inner and outer corner installations. Its two independent wall-plates can be mounted to adjacent walls, allowing your compatible TV to be safely positioned within a corner. Alternatively, turning the wall plates inwards allows for mounting to an outer edge, column or pillar. Each wall-plate will need to be mounted to a wood stud or concrete surface. Tools required for installation include -
- Drill
- 7/32" bit (wood), 3/8" bit (masonry)
- Socket wrench
- Phillips screwdriver
- Hammer
- Stud finder
- Level
- Pencil
- Tape Measure
Full-Motion Design: The Kanto PDC650 features a full-motion design that accommodates a variety of TV viewing positions. The PDC650 offers extension, tilt, swivel, and roll adjustments. Depending on screen size and the distance between the corner wall-plates, the articulating arms offer up to 40° of swivel in either direction. You can also further improve line-of-sight and reduce glare by tilting your mounted TV 15° forward or 3° backward.
- Extension: The PDC650 can extend up to 21.25" from the wall, giving you plenty of room for tilting and swiveling your TV, or for making connections on back of the television. You can push your mounted flat-panel TV within 2" of the wall.
- Swivel: Swivel the articulating arms up to 40 in either direction to ensure your TV is properly positioned. Note that the range of movement will depend on the size of your TV and the location of the wall-plates.
- Tilt: In order to reduce glare and improve line-of-sight with your TV, the PDC650 mount can be tilted 15° forward and 3° backward.
- Roll: You can also raise and lower (+/-3° ) the the sides of the TV to make sure the TV is level once it is mounted on the wall.
Cable Management: The Kanto PDC650 also includes cable management clips to coveniently route your cables and wall-plate covers to conceal your cables for a professional looking installation.
