Features
TV Compatibility: The Kanto M600 full-motion wall-mount bracket supports 26" to 55" flat-panel TVs that weigh up to 77 lbs. The TV must meet the following VESA and screw size requirements.
- VESA Sizes: 100x100, 150x100, 200x100, 200x150, 200x200, 200x600, 200x400, 300x200,300x300, 400x200, 400x600, or 400x400.
- Screw Size: M4, M5, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Solid Steel Construction: The Kanto M600 full-motion TV wall-mount bracket is constructed out of solid steel and features a powder-coated black finish.
Full-Motion Design: The Kanto M600 features a full-motion design that accommodates a variety of TV viewing positions. The M600 offers extension, tilt, swivel, and roll adjustments.
- Extension: The M600 can extend up to 18.3125" from the wall and sit as close as 2.25" from the wall. The wall-mount bracket may be visible with smaller TVs when the bracket is fully retracted.
- Tilt: With the use of a simple tightening mechanism, you can easily adjust the to tilt of your TV 1to suit your viewing needs. The tilt mechanism is easily accessible and uses a spring-loaded lever system that requires no tools. Tilt your TV forward up to 14° or backward 3° , and you can simply tighten the head in place at your desired viewing angle.
- Swivel: The M600 provides 90° of swivel in either direction, depending on screen size. Smaller screen sizes will have a larger swivel range, while larger screen sizes will have a smaller swivel range. This is ideal for mounting on pillars or corners, giving you the ability to swivel your TV to watch it in a living room, kitchen or any other adjacent space.
- Roll: You can also raise and lower (+/-3° ) the the sides of the TV to make sure the TV is level once it is mounted on the wall.
Cable Management: Built-in cable management tucks your cables out of the way and keeps them neatly and safely organized. Two detachable cable management clips allow you to route your power and video cables neatly from your TV to the wall. In addition, plastic wall plate covers are also provided to give you a clean, modern look.
Single Stud Installation: The Kanto M600 full-motion TV wall-mount bracket mounts to a single wood stud. Mounting hardware is included for wood stud, brick, and concrete installations. Tools required for installation include -
- Drill
- 3/16" bit (wood), 3/8" bit (masonry)
- Socket wrench
- Phillips screwdriver
- Stud finder
- Level
- Pencil
