Features
TV Compatibility: The Kanto FMC4 full-motion corner wall-mount bracket supports 30" to 60" flat-panel TVs that weigh up to 100 lbs. The TV must also meet the following VESA and screw size requirements.
- VESA Sizes: 100x100mm to 600x400mm
- Screw Size: M5, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Solid Steel Construction: The Kanto FMC4 full-motion corner wall-mount TV bracket is constructed out of solid steel and features a black powder-coated finish.
Full-Motion Design: The Kanto FMC4 features a full-motion design that accommodates a variety of TV viewing positions. The FMC4 offers extension, tilt, swivel, lateral, and level adjustments.
- Extension: The FMC4's telescoping support arm extends 3.125" to 26.0" from the wall, providing enough space for TVs as large as 60".
- Swivel: Depending on the size of your TV and the amount of extension, the Kanto FMC4 sliding TV wall mount can swivel 135° in either direction, depending on screen size. With this range of motion, your TV can be seen from almost every part of the room.
- Tilt: The TV wall mount's ability to tilt 5° backward is useful for lower installations. For higher mount installations, tilting the sliding TV wall mount 10° forward allows you to find the perfect viewing position. To keep the angle of your TV constant, use the included Allen key to tighten the tilt tension on the two hex bolts located on the tilt head.
- Lateral: The mount features a sliding pivot point that can be moved 20" to the left or right. With this function, you can move the entire arm and TV plate laterally across the wall plate for a wide range of viewing options. The adjustable pivot point lets you center your TV perfectly, or move it to either extreme if you need to wrap it around a corner or accommodate off-center studs.
- Level: Sometimes heavier TVs will twist slightly, especially if you shift your TV off-center on the TV plate. With a simple adjustment, level your commercial TV mount horizontally for a perfect alignment
Cable Management: An integrated cable management system allows you to route your power and video cables neatly between the TV and the wall. Now, you'll be able to keep your cables tidy and out of sight for a clean, organized look.
Dual-Stud Installation: The Kanto FMC4 full-motion corner TV wall-mount bracket can accommodate both 16" and 24" stud spacing, and comes with all the hardware you need for wood stud and concrete installation. Tools required for installation include -
- Drill
- 7/16" bit (wood), 3/16" bit (masonry)
- Socket wrench
- Phillips screwdriver
- Hammer
- Stud finder
- Level
- Pencil