Features
Outdoor Weatherproof Construction: The Kanto CM600SG full-motion outdoor ceiling-mount provides a weather-proof solution for mounting your TV outdoors on your porch, screened in deck, or covered patio. The CM600SG offers anodized aluminum and solid stainless steel construction with a durable powered coated black finish construction that prevents corrosion from the elements.
TV Compatibility: The Kanto CM600SG outdoor full-motion ceiling-mount bracket supports 37" to 70" flat-panel TVs that weigh up to 110 lbs. The TV must also meet the following VESA and screw size requirements.
- VESA Sizes: 75x75mm to 600x400mm
- Screw Size: M5, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Full-Motion Design: The Kanto CM600SG features a full-motion design that accommodates a variety of TV viewing positions. The PS400SG offers height, tilt, swivel, and level adjustments.
- Height Adjustment: The CM600SG's telescoping extension pole provides up to 23.5" of height adjustment, ensuring your drop ceiling TV is positioned at an ideal level (42.75" to 66.25" from the ceiling).
- Swivel Rotation: The CM600SG offer 360-degrees of rotation, allowing you to achieve the perfect viewing angle.
- Tilt Mechanism: he Kanto CM600 full motion TV ceiling mount offers four discrete tilt options. In 5° increments, angle your TV up to 15-degrees forward to improve line-of-sight. To compensate for lean, the Kanto CM600SG telescoping TV ceiling mount bracket can also be tilted 6-degrees backward.
- Level (Roll): You can also raise and lower (+/-2° ) the the sides of the TV to make sure the TV is level once it is mounted to the ceiling.
Integrated Cable Management: The CM600SG extension pole's hollow core provides an unobstructed path to route your wires, cables, and cords while an opening in the mounting plate allows them to continue through the ceiling for a truly professional setup.
Ceiling Mount Installation: The CM600SG full-motion TV ceiling mount's detachable mounting plate can be easily installed to any wood stud or concrete ceiling. Simply slide the extension pole into place and secure it to complete the installation. Because the mounting plate can be adjusted up to 90-degrees, the CM600SG can even accommodate angled and sloped ceilings, as well as be mounted to a wall. Tools required for installation include -
- Drill
- 7/32" bit (wood), 3/8" bit (masonry)
- Socket wrench
- Phillips screwdriver
- Hammer
- Stud finder
- Level
- Pencil
- Tape Measure
Security Torx TV Screws: The Kanto CM600SG includes Torx screws to secure the mounting bracket to your outdoor TV for an added layer of protection against unwanted removal.