Features
Overview: The Furman Merit X Series M-8Lx is rack-mountable power conditioner, designed for use by audio/video professionals, contractors, broadcasters, musicians, and home owners. It has 8 high-quality AC outlets on the rear panel, plus a front panel convenience outlet. The unit is rack-mountable, and takes up 1U of rack space. The M-8Lx features two pull-out, front panel lights, a flexible 6.5' power cord with three 14-gauge conductors and a NEMA 5-15P 3-prong plug.
Applications: The M-8Lx is recommended for professional audio and video applications, and can be installed in permanent or portable rack systems. It can also be used in rack-mounted home A/V systems.
Rear Panel AC Outlets: The M-8Lx has a total of eight 3-pronged outlets on the rear panel. Using the front panel rocker switch, all of the outlets are turned on at once. Three of the outlets are spaced 2-1/2" apart to accommodate bulky AC adapters ("wall warts"). The other 5 outlets are spaced 1-1/4" apart.
Convenience Outlet: On the front panel, a single 3-pronged convenience outlet is provided for powering devices that are not considered to be "permanently" installed. This allows you to charge your mobile phone or tablet without having to plug it into a rear outlet. The front panel outlet is switched on/off with the other outlets.
Surge Suppression: The M8-Dx provides excellent surge suppression for your connected equipment, with a 150 Joule rating (energy dissipation).
Noise Filtering: The unit provides AC noise filtering to reduce radio frequency (RFI) and electromagnetic interference (EMI). By reducing the noise floor caused by dirty AC power coming into your sound and video equipment, you will get better performance without lines, pops, crackles, hum, or radio station signals coming out of your equipment.
Circuit Breaker: The M-8Lx has a resettable 15 Amp thermal circuit breaker on the front panel. If the breaker encounters an excessive load, it will "trip" to protect the connected components. After resetting the circuit breaker, you should reduce the load before turning the unit on.
Retractable Rack Lights: Two retractable front panel light tubes are provided for illuminating other equipment in your rack. A dimmer knob controls the brightness of both lights. The light tubes can be pulled out approximately 2-3/4" (total protrusion 3-1/2" from the front panel) and rotated about 1/4 turn. When not in use, the light tubes retract to approximately 3/4", and an internal switch turns them off to maximize the bulb life.
Specifications:
- Maximum Output Current: 15 Amps
- Operating Voltage: 120 VAC
- Maximum Continuous Operating Voltage: 130 Volts RMS
- Standard Level AC Surge Protection: Merit Class (sacrificial)
- Spike Protection Mode: Line to neutral
- Energy Dissipation: 170 joules
- Peak Impulse Current: 12,000 Amps
- Let Through Voltage (@125 amps, 8/20μS waveform): 400 volts
- Noise Attenuation: Transverse mode: >26dB, 200 kHz to 10MHz
- Dimensions: 19" W x 1.731" H x 8.8" D
- Weight: 6 pounds