Onkyo TX-RZ50 :

9.2 Ch THX Network A/V Receiver

More details on the Onkyo TX-RZ50

Product Research

Audio Section

RZ Series: Onkyo's premium RZ series AV receivers utilize an upgraded Dynamic Audio Amplification (DAA) system that stabilizes high power delivery from a custom-made High-Current Low-Noise Power Transformer and customized, high-current smoothing capacitor - resulting in accurate speaker control and truly spectacular dynamics. The RZ series also employs discrete non-phase-shift amps to capture a wide 5Hz-100kHz frequency response, while its black anodized extruded aluminum heat-sink controls the length and pitch of resonance frequencies to limit vibration and improves cooling efficiencies to reduce thermal distortion. In addition, a new HDMI board features shorter signal-paths and larger, carefully refined ground paths for clean AV signals, while the receiver's Quad-core SoC (System on a Chip) is isolated to prevent any interference. The RZ Series AV receiver finishes off its refinements with an aluminum front-panel and fold-down door. These enhancements deliver a significant boost to the dynamics, detail, and accuracy of music and movie soundtracks for a listening experience that packs a stunning emotional impact. The RZ series is backed by a 3 year parts & labor warranty.

Dynamic Audio Amplification: The TX-RZ50 AV receiver features Onkyo's Dynamic Audio Amplification with a 9-channel amplifier rated at 120 watts (into 8-ohms, at 20Hz-20kHz, with 0.08%, driving 2 channels). Onkyo's Dynamic Audio Amplification technology incorporates a Hi-Current, non-phase shift amplifier design with discrete output stage circuitry and a H.C.P.S (High Current Power Supply) capable of driving 4 to 16-ohm speakers with dynamic control, while producing clear, detailed sound.

• Hi-Current Amp Design w/ Discrete Output Stage: The unique elements of Onkyo's Dynamic Audio Amplification system comprise high-current, low-impedance architecture with discrete output stage circuitry & custom audio capacitors for instantaneous high-current power and precisely control of your loudspeakers for dynamic, accurate sound.
• Non-Phase-Shift Amplification Circuitry: Onkyo's Wide Range Amp Technology (WRAT) circuit layout prevents phase shifting by pushing the roll-off point higher than the listening-level frequency. Amplifying sound without phase shift creates an uncommonly well-focused and realistic audio image.
• H.C.P.S. (High Current Power Supply): The receiver's High Current Power Supply (H.C.P.S.) transformer features an isolated power supply design and high-capacity filter capacitors to deliver large amounts of power necessary for reproducing the wide dynamics of movie soundtracks and the detail and clarity of your music.

Amplifier Assignment: The AV receiver's 9-channel amplifier can be configured in a variety of ways to match your type of speaker setup.

• For Dolby Atmos & DTS:X Applications:
  • 5.1.2ch Bi-Amp: Assigns all nine amplifiers of the receiver to the Main Zone with the front speakers bi-amped. The 5.1.2ch speaker system consists of Front, Center, Surround, & Dolby Atmos speakers (Surround Back speakers not available in this mode). In this mode, Zone 2 and Zone 3 must be powered by a separate amplifier.
  • 5.1.2ch + Zone 2 or Zone 3: The nine amplifier channels of the receiver are assigned to power a 5.1.2ch speaker system in the Main Zone and stereo speakers in either Zone 2 or Zone 3 (not both). The 5.1.2ch speaker system consists of Front, Center, Surround, & Dolby Atmos speakers (Surround Back speaker are not available in this mode).
  • 5.1.4Ch: The nine amplifier channels of the receiver are assigned to power a 5.1.4ch speaker system in the Main Zone. The 5.1.2ch speaker system consists of Front, Center, Surround, & two sets of Dolby Atmos speakers. In this mode, Zone 2 and Zone 3 must be powered by a separate amplifier.
  • 5.1.4Ch + Zone 2: The nine amplifier channels of the receiver are assigned to power a 5.1.4ch speaker system in the Main Zone and a pair of loudspeakers in Zone 2. The 5.1.4ch speaker system consists of Front, Center, Surround, & two sets of Dolby Atmos speakers. When Zone 2 speakers are active, the Main Zone's Height 1 speakers are inactive, limiting the Main Zone to 5.1.2ch. Zone 3 must be powered by a separate amplifier.
  • 7.1.2Ch: Assigns all nine amplifiers of the receiver to the Main Zone for a 7.1.2ch configure which consists of Front, Center, Surround, Surround Back, and Dolby Atmos speakers. Zone 2 and Zone 3 speakers must be powered by separate amplifiers.
  • 7.1.2Ch + Zone 2: In this configuration the receiver's nine channel amplifier powers the Front, Center, Surround, Surround Back, and a pair Dolby Atmos speakers in the Main Zone, while also powering a pair of Zone 2 speakers in another room. When Zone 2 speakers are active, the Main Zone's Height 1 speakers are inactive, limiting the Main Zone to 7.1ch. Zone 3 speakers must be powered by a separate amplifier.
  • 7.1.4Ch (requires separate amp): In this configuration the receiver's nine channel amplifier powers the Front, Center, Surround, and two sets of Dolby Atmos speakers in the Main Zone, while the Surround Back speakers of the Main Zone are powered by a separate amplifier. Zone 2 and Zone 3 must be powered by separate amps.
  • 7.1.4Ch + Zone 2 (requires separate amp): In this configuration the receiver's nine channel amplifier powers the Front, Center, Surround, and two sets of Dolby Atmos speakers in the Main Zone, while also powering a pair of Zone 2 speakers in another room. The Main Zone's Surround Back speakers are powered by a separate amplifier. When Zone 2 speakers are active, the Main Zone's Height 1 speakers are inactive, limiting the Main Zone to 7.1.2ch. Zone 3 speakers must be powered by a separate amplifier.
• For Dolby Digital & DTS Applications:
  • 7.1Ch Bi-Amp: Assigns all nine amplifiers of the receiver to the Main Zone with the front speakers bi-amped. The 7ch speaker system consists of Front, Center, Surround, and Surround Back. In this mode, Zone 2 and Zone 3 must be powered by a separate amplifier.
  • 7.1Ch + Zone 2 or Zone 3: The nine amplifier channels of the receiver are assigned to power a 7ch speaker system in the Main Zone and stereo speakers in either Zone 2 or Zone 3 (not both). The 7ch speaker system consists of Front, Center, Surround, and Surround Back.
  • 5.1Ch Bi-Amp + Zone 2: Assigns seven amplifiers of the receiver to the Main Zone with the front speakers bi-amped and two amplifier channels assigned to Zone 2 to power a pair of speakers in another room. The 5ch speaker system consists of Front, Center, and Surround (Surround Back speaker channels are not available in this mode). Zone 2 cannot be played back at the same time as the Main Zone in this configuration.
  • 5.1Ch + Zone 2/3: Assigns five amplifier channels to the main zone for 5ch playback and four amplifiers to Zone 2 and Zone 3 for stereo playback in each zone. The 5ch speaker system consists of Front, Center, and Surround (the receiver's Surround Back and Height amplifier channels are reassigned to power both Zone 2 and Zone 3).

Auto Room Correction & Speaker Calibration: The Onkyo TX-RZ50 offers auto room correction & speaker calibration using AccuEQ or DIRAC Live (cannot use both). Both measurement methods use the supplied speaker setup microphone (keep the room as quiet as possible during measurement). Each speaker connected to the AV receiver will output a test tone at a high volume during measurement. If you have a powered sub connected, make sure it turned on and the volume set to more than half. Calibration takes about 20 minutes to be completed.

• AccuEQ: AccuEQ streamlines the initial setup of your home theater setup and ensures the Onkyo AV receiver and speakers are properly calibrated for the best performance in your listening space. AccuEQ calculates speaker distance from the listening position, adjusts speaker sound pressure level, and sets the speaker crossover. The latter selects the correct point to roll off low-frequency sound to the subwoofer. The result is clear and balanced full-spectrum surround sound.
• DIRAC Live : DIRAC Live is a state-of-the-art digital room correcting technology that improves overall audio performance for enhanced musical staging, clarity, dialog, and deeper bass. Dirac Live Room Correction (Full Bandwidth version) automatically calibrates sound in your room using the free Onkyo Control App (for & ), plus the included microphone; or the Dirac Live desktop or laptop application and a 3rd party USB mic (not included). It analyzes your audio system and listening environment by examining acoustic data measured by the microphone and detecting deficiencies. It corrects both the timing and amplitude aspects of sound colorations using a mixed-phase correction filter throughout the listening area, not just a particular zone. Dirac Live will unlock your loudspeaker system's full potential in any listening space and delivers a uniquely pristine listening experience.

Notes: You can choose to bypass DIRAC Live and AccuEQ so you can manually set the distance, crossover, EQ, and level of each speaker.

Precision 24-Bit/192kHz DAC: The Onkyo TX-RZ50 employs 24-bit/192kHz digital-to-analog conversion for playback of 2ch Hi-Res audio (such as FLAC & DSD), as well a multichannel 3D audio (such as Dolby Atmos & DTS:X).

• Vector Linear Shaping Circuitry (Front Channels Only): Onkyo developed Vector Linear Shaping Circuitry (VLSC) to reassemble the signal in its original form following processing. Unlike conventional filters, VLSC removes pulse noise generated in D/A conversion, allowing the sound wave to be reproduced with extremely high fidelity for a smooth analog signal. The signal's data is converted between sampling points and joined with analog vectors in real time to produce a smooth output wave form. The result is a virtually noiseless, smooth, analog signal that brings out even the most subtle of nuances in music sources.
• PLL Jitter-Cleaning Circuit Technology: PLL (Phase Locked Loop) jitter-cleaning circuit technology reduces jitter by comparing the input and output phases of the digital signal and creating an accurate clock waveform. This enhances the precision of digital signal processing and noticeably improves audio quality. Jitter-cleaning technology works for S/PDIF audio signals only.
• Digital Filter: You can switch the type of digital filter in the audio DAC. You can choose "Slow" (gives the sound a soft and fluid feel), "Sharp" (gives the sound more structure and firmer feel) or "Auto" (auto). The setting can be separately set for each source input. The Digital Filter only can be set when the sampling frequency is 44.1kHz or more.

Compatible Digital Audio Formats: The AV receiver supports the following stereo & multichannel digital audio formats through its HDMI jacks and optical/coax digital inputs.

Dolby Atmos & DTS:X: and allow engineers to map sound anywhere in 3D space with effects moving from speaker to speaker all around the room and wrapping your audience in the latest films and games. You can also enjoy your 3D speaker layout with classic titles thanks to and DTS Neural:X which find overhead cues in legacy soundtracks and upmix for awesome spatial realism. In addition, when playing any Dolby or DTS audio soundtrack, engaging Dolby Atmos Height Virtualizer or enables a more immersive listening experience, creating a virtual surround and height effect from traditional speaker layouts without employing additional surround or height speakers. The Onkyo TX-RZ50 can support up to a 5.1.4, 7.1.2, or 7.1.4* channel Dolby Atmos/DTS:X home theater system. A 7.1.4 channel speaker system will require a separate power amp to drive the Surround Back speakers.

THX Certified Select: guarantees the same high-volume sound you experience at a commercial theater in your home. To gain certification, amplifiers must pass the industry's most severe bench-tests covering every aspect of audio performance to satisfy THX requirements. THX spends 40-60 hours on 2,000 bench-tests in 75 categories covering 14,000 data points ensuring that the receiver is capable of meeting rigorous audio and video performance standards for reference level, distortion-free playback. THX delivers superior sound quality for movie, music, and gaming soundtracks through the use of the following advanced technologies and listening modes.

• ASA (Advanced Speaker Array): ASA is a technology patented by THX to provide a broad surround sound experience by adjusting the side and back surround speaker sounds respectively. When installing the surround back speakers, first select the distance between the two surround back speakers in the THX Audio settings. This setting optimizes the surround sound environment.
• Adaptive Decorrelation: In a movie theater, a large number of surround speakers help create an enveloping surround sound experience. If a home theater only has two sidewall surround speakers, the surround speakers may sound similar to headphones lacking spaciousness and envelopment. Surround sounds will also collapse toward the closest speaker as you move away from the middle seating position. Adaptive Decorrelation slightly changes one surround channel's time and phase relationship with respect to the other surround experience as in a movie theater using only two rear speakers.
• RE-EQ & Timbre Matching: Many movie soundtracks are mixed in studios for playback in large cinema auditoriums with an array of speakers. When played on home systems, they may appear abrasive and edgy. Re-EQ establishes a more accurate tonal balance when enjoying movies in your home. Your ears hear different tonal qualities in sounds coming from different directions. Timbre Matching restores the frequency balance between your front and surround speakers ensuring seamless and smooth panning between the front to back of the room.
• Boundary Gain Compensation (BGC) & THX Loudness Plus: Sitting near a wall may result in distorted bass response. BGC corrects the way low?frequency sound is perceived when seated near a wall. This results in a more accurate bass response. THX Loudness Plus is a volume control technology that automatically adjusts the front-to-back speaker level relationship as you turn the volume down. With THX Loudness Plus home theater audiences can now experience surround sound at any volume level.
• Listening Modes: Choose between 4 THX Listening Modes - THX Cinema, THX Game, THX Music, and THX Surround EX. THX Cinema recreates the ambiance of the movie theater by positioning the 5.1, 7.1and immersive mixes to submerse you in the movie's soundtrack. THX Game distributes the sound effects and dialogue generated by the game engine by placing the audio from a 5.1, 7.1 or immersive mix to the appropriate "action" location - creating 360-degree gaming experience. THX Music emulates the original studio environment for the 5.1, 7.1 or immersive mix for an accurate and increased sense of spaciousness and localization - placing you directly in the recording session. THX Surround EX decodes the third surround channel from the traditional two surround channels to create a more immersive entertainment experience.

IMAX Enhanced Technology: Get the most premium at-home entertainment experience with , the latest technology program from IMAX that sets a new standard for image, sound, scale and content quality. This new certification and licensing program combines IMAX digitally re-mastered 4K HDR content and DTS audio technologies to offer a new level of quality in immersive sight and sound experiences in the home. IMAX Enhanced lets you experience premium content digitally remastered by IMAX, so you can watch the highest-quality 4K movies with immersive audio delivered by DTS. Not only will IMAX Enhanced content look and sound amazing, but other audio/video content will also look and sound great.

• Remastered 4K/HDR Video: It utilizes a sophisticated, advanced algorithm designed to produce the highest-quality, sharpest 4K HDR images. This advanced process accurately reduces noise and grain under the filmmaker's guidance to best optimize the content for a much higher quality, higher brightness 4K HDR display format. Select IMAX Enhanced titles that were shot with IMAX cameras or specially formatted for IMAX theatres will also include an expanded aspect ratio for the film's home release to show your more picture on your TV. IMAX Enhanced certified TVs must be at least 65" with support for HDR10 and dynamic, as well as specific calibration, resolution, color, brightness, contrast, and scale of image capabilities.
• Remastered DTS:X Audio: IMAX and DTS will also partner with award-winning Hollywood sound mixers to use a special variant of its DTS:X codec technology integrated in home audio equipment to deliver an IMAX signature sound experience that is dynamic, immersive, theatrical, and powerful. IMAX Enhanced supports both 5.1 and 11.1 formats, but the recommended speaker layout for an IMAX Enhanced system is 7.2.4 with seven horizontal speakers, two subwoofers and four height speakers; 5.1.4 is the minimum layout for IMAX Enhanced. However, due to various constraints you may opt to install only a 5.1ch speaker system. In such cases, DTS Virtual:X is required to properly render and remap audio to the available speakers.
• Available IMAX Content: IMAX is working with its global studio and other content partners to build a steady stream of IMAX Enhanced versions of movies and other programming using the newest, proprietary post-production process developed by IMAX. IMAX will be announcing and releasing IMAX Enhanced versions of a wide range of films both for 4K/HDR streaming and Ultra HD Blu-ray Discs.

• To take full advantage of IMAX Enhanced, you need an IMAX Enhanced certified 4K/HDR TV (65"-up) or Projector and an IMAX Enhanced certified DTS:X enabled AV receiver or soundbar.
• IMAX and DTS developed the IMAX Enhanced program out of their decades of combined expertise in image and sound science to make it easier for consumers to select the products and content that will deliver the highest-quality, sharpest 4K HDR images and powerful, immersive sound at home.
• To qualify and carry the IMAX Enhanced logo, the highest-end TVs, AV receivers, projectors, and soundbars must meet stringent performance standards established by IMAX, DTS and Hollywood's leading colorists in order to create a consistent and higher bar for image and sound performance on premium devices.

Onkyo Original DSP Modes: Onkyo's Original DSP Modes, combined with Dolby Digital & DTS processing, produce more realistic, powerful sound effects for your movie and music sound tracks based on the type of content and your home theater setup. You can choose from the following:

• Orchestra: Suitable for classical or operatic music. This mode emphasizes the surround channels in order to widen the sound image, and simulates the natural reverberation of a large hall.
• Studio-Mix: Suitable for rock or pop music. Listening to music in this mode creates a lively sound field with a powerful acoustic image, like being at a club or rock concert.
• TV Logic: Suitable for TV shows produced in a TV studio. This mode enhances the surround effects to the entire sound to give clarity to voices and create a realistic acoustic image.
• Unplugged: Suitable for acoustic instruments, vocals and jazz. This mode emphasizes the front stereo image, giving the impression of being right in front of the stage.
• Game: The receiver also offers four different Gaming modes - RPG, Action, Rock, and Sports.
• Stereo/All Channel Stereo (AllCh Stereo): In Stereo mode, sound is output from the front left and right speakers and subwoofer. In All Channel Stereo Mode, stereo sound is output from all speakers - ideal for background music.
• Mono/Mono Music: In Mono mode, when the input signal is analog or PCM, the center or the left and right front speakers output the sound in monaural. In Mono Music mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you are within the listening room
• Theater-Dimensional (T-D): In this mode, you can enjoy a virtual playback of multichannel surround sound even with only two or three speakers. This works by controlling how sounds reach the listener's left and right ears

Direct & Pure Audio Mode: The Direct listening mode can be selected for all input signals. In this mode, processing that affects sound quality is shut down, and sound closer to the original is reproduced. The Pure Audio mode takes it one step further by also turning off the display to provide even purer sound. The sound is reproduced with the soundfield based on the number of channels in the input signal. For example, a 2ch signal is output only from the front speakers. Note that other sound adjustments are not available when this mode is selected.

Audio Enhancements: The Onkyo TX-RZ50 receiver provides various audio enhancements to deliver a high-quality listening experience every time.

• CinemaFilter: The CinemaFilter softens overly bright movie soundtracks. Movie soundtracks are typically mixed for a large theater (relative to your home theater) with lots of soft seats and thick curtains on the walls. Home theater settings often lack these high frequency absorbing wall treatments, making the soundtrack sound too bright. CinemaFilter accounts for this and for many movies sounds more natural at home.
• Music Optimizer: The Music Optimizer function enhances the sound quality of compressed music files. The Music Optimizer function only works with PCM digital audio input signals with a sampling rate below 48kHz, analog input signals, and Bluetooth audio.
• Late Night Feature: The Late Night feature limits the dynamic range of Dolby Digital recordings. Limiting the dynamic range makes it easier to find a volume that ensures the quiet sounds are not too quiet and the loud sounds are not too loud for night time listening. This allows you to comfortably listen to without the need to constantly adjust the volume to keep from waking family/neighbors. The choices are: Off, Low, and High. This feature only works with Dolby Digital Encoded software and the depth of the feature will vary based on the individual software package.
• Stereo Assign Mode: Stereo Assign Mode switches playback from Front to Height 1, Height 2, Surround, or Surround Back speakers (depending on your layout). It's ideal for ambient background listening.

Dialog Improvements: The receiver offers a variety of dialog enhancements that make it easier to hear dialog and vocal when listening to movie and music soundtracks. The Vocal mode emphasizes movie dialog and music vocals, so you can hear them more easily amongst the movie effects and musical instruments. The Vocal mode can be set from 1 (low) to 5 (high). Dialog Control allows you to boost the dialog in a DTS:X soundtrack to make dialog more intelligible in noisy environments. Center Spread expands the center channel signal to left and right front speakers to create a wider frontal audio image for the listener, when in Dolby Surround mode.

Bass Management: The Onkyo AV receiver offers Double Bass and Tone Control to get the most bass impact out of your system. You can activate the Double Bass function in order to boost bass output even more by feeding bass sounds to the front left/right speakers, center-channel, and powered subwoofer. In addition, you can independently adjust the Bass (20Hz) and Treble (20kHz) of the receiver's Front L/R channels from -10 to +10 dB.

Volume & Level Setup: The Onkyo AV receiver provides the following volume & level settings.

• Maximum Volume: Use this feature to set the receiver's maximum volume level for the Main Zone, Zone 2, and Zone 3. This feature is useful to avoid turning the volume too loud by mistake. You can set the Max Volume from 50 to 99, or Off (disabled).
• Power On Volume: Use this feature to set the volume level when the power is turned on in the Main Zone, Zone 2, and Zone 3. You can choose between Last (same as the volume when the unit was turned off), Min, or 0.5 to 99.5, or Max.
• My Input Volume: You can set specific source inputs to turn on at a specific volume level when you switch to that particular source. Choose from Last, Min, 0.5 to 81.5, or Max.
• Mute Level: Set the volume lowered from the listening volume when "Mute" is selected. Choose from 0, -40dB, or -20 dB.
• Headphone Level: With this setting, you can specify the headphone volume (-12 to +12dB) relative to the main volume. This is useful if there's a volume difference between your speakers and your headphones.

eARC (Enhanced Audio Return Channel): This feature of the AV receiver's main HDMI monitor output allows audio to be sent from your compatible TV to the receiver through the same HDMI cable already being used to send audio and video to your TV. This eliminates the need for extra cables connected to your television. eARC (Enhanced Audio Return Channel) will support uncompressed audio formats like Dolby TrueHD, Dolby Atmos, DTS:X, & DTS HD Master Audio - whereas the previous ARC (Audio Return Channel) was limited to only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Note: Supported content will be dependent on whether your TV features a HDMI eARC or ARC jack.

Analog Audio Outputs: The Onkyo TX-RZ50 is outfitted with the following analog audio outputs.

• Binding-Post Speaker Terminals: There are binding-post terminals for all speaker connections - Front, Center, Surround, Surround Back/Zone 3/Height 2, Height 1/Bi-Amp, and Zone 2. The binding post terminals will accept bare-wire (up to 10AWG), pin-connectors, and banana plugs (single only). Use 4- to 16-ohm speakers (there is an impedance setting in the receiver's menu).
• Dual Subwoofer Outputs: The AV receiver offers two subwoofer outputs to connect dual powered subs for extra bass. The dual outputs are wired in parallel and share the same input signal (they are not discrete).
• Headphones: When headphones are plugged into the full-size 1/4" jack on the front panel, all the speakers are automatically muted. The receiver supports headphones with impedances of 8 to 600-ohm.

Phono Input: The TX-RZ50 has a discrete low-noise phono pre-amp and is outfitted with Phono (MM) input for connection of a turntable with a moving magnet cartridge so you can enjoy listening to your vinyl records. There is also a ground screw terminal.

AM/FM Tuner: With the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick selection. You can store a combination of up to 40 of your favorite FM/AM radio stations as presets.

Video Features

HDMI 2.1: Featuring six rear-panel HDMI inputs and two HDMI outputs, the Onkyo TX-RZ50 incorporates an advanced video section that features some of the latest HDMI 2.1 specifications; including support for 4K/120 and 8K/60Hz video pass-through (up to 40Gbps), HDCP 2.3 compatibility, BT.2020 Wide Color Gamut, and 4:4:4 Pure Color sub-sampling. There is also a front-panel HDMI input that is HDMI 2.0 certified and supports up to 4K/60Hz.

• 4K/120 Hz + 8K/60Hz Pass-Through: All of the Onkyo receiver's rear-panel HDMI inputs and monitor outputs support up to 4K (3840x2160 pixels) video @ 120 frames per second, as well as 8K (7680 x 4320) video @ 60 frames per second. The HDMI 1-2-3 inputs and both outputs support up to 40Gbps bandwidth, while the HDMI 4-5-6 inputs support up to 24Gbps bandwidth. The front-panel HDMI input only supports up to 4K/60Hz (9Gbps). The receiver will also pass 1080p/i, 720p, and 480p/ video signals over HDMI.
• HDCP 2.3 Compliant: All of the AV receiver's rear-panel HDMI inputs and outputs support HDCP 2.3, which fully complies with the latest copyright protection standard for 4K/HDR video transmission. The front-panel HDMI input is HDCP 2.2 compliant.
• 4:4:4 Color Subsampling: The rear-panel HDMI inputs and monitor outputs support RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0 color subsampling (pixel depth and frame rate will vary). With 4:4:4 color subsampling, luminance (brightness) and chroma (color) are sampled at the same rate; resulting in an RGB color palette as big as the video sampling rate for

Shipping Policy at CapitalSound.ca

Free Shipping Across Canada

At CapitalSound.ca, we are pleased to offer Free Standard Shipping on all orders within Canada. No minimum purchase required. Experience the top-notch quality of our products without the additional cost of shipping.

Estimated Delivery Time

• Orders are typically processed within 1-2 business days.
• Standard shipping generally takes 3-7 business days.

What to Expect

1. Order Confirmation: You will receive an order confirmation email as soon as you have placed an order. Please keep this email for your records.
2. Shipment Notification: We will send you a shipment notification email when your order has been shipped.

Additional Information

• Signature may be required upon delivery.
• We currently do not ship to P.O. Boxes.

Shipping Damage Policy

If the shipping box shows signs of physical damage, we recommend inspecting the product while the shipping company is present. Minor punctures or dents to the box do not often result in damage to the well-padded product inside, so a refusal of delivery is generally not necessary for minor box imperfections. However, should the product itself show signs of damage, it must be refused at the time of delivery for an RMA. Products not refused due to damage at the time of delivery will not be eligible for RMAs. To ensure your full rights to warranty and potential future claims, please have the delivery company note any box damage on file, even if the product itself appears undamaged.

Questions?

For any questions regarding your order, please contact us.